Spacak FT14 heat drain valve
British Speixak traps are operated by the difference in density between steam and condensate. This type of trap is very convenient to operate and can operate effectively when the condensate load changes, while not being affected by sudden changes in operating pressure. Compared with its size, this type of trap has a large discharge capacity, up to 150000kg/h, and can be immediately discharged with the generation of condensate water. Because of this characteristic, the trap is ideal for steam control equipment. The maximum working pressure of the trap is up to 80bar.
The main characteristics of Spacak FT14 heat drain valve：
1、Combined with simple, convenient maintenance;
2、Can be installed horizontally or vertically;
3、Advanced design, stainless steel internal structure, to ensure that the trap has good corrosion resistance and wear;
4、Standard products are equipped with built-in exhaust valve or built-in steam breaking gas lock device;
5、The drain is lower than the water level, can avoid the leakage of the main steam;
6、With thread and flange link options;
7、The built-in exhaust valve ensures that the trap has a larger condensate displacement when it starts working.
Spacak FT14 heat drain valve has complete specifications and numerous models. This type of trap is the best choice for heating and industrial equipment that requires rapid discharge along with the generation of condensed water in order to ensure effective heat transfer. The FT46/FTS14 is suitable for clean steam systems.
注意：所有认证/检验要求必须在下订单时说明。
