Product introduction
FT float trap
Spacak FT14HC steam trap Advantages：
It can work freely at high load and low load. The model with automatic air exhaust device has good air exhaust performance and can adapt to the rapid and large fluctuations of load and pressure. Therefore, it is the best choice for equipment with white dynamic temperature control or process drainage.
Spasalco FT14HC Steam trap disadvantages：
Exposure to low temperatures may be affected by freezing but the trap can be insulated or drained a small auxiliary thermostatic trap is installed at the bottom of the water valve to remove water in the body of the float trap.
FT14 and FT14HC cast iron feedstock float ball traps, all stainless steel internals with built-in active exhaust valve/equipment. Horizontal equipment, threaded connection, can be repaired online, movement direction see valve body indication.
UK Spacak FT14HC Steam Trap type：
1）FT14HC High Displacement Type（DN25 only）
①The use of a very wide range of traps
②Continuous discharge, and discharge is large, to ensure the system of heat transfer.
2）FT14 canonical type
①It can be used efficiently under concave and convex condensate load.
②For active temperature control equipment, float trap is the best choice.
3）DN32，DN40 and DN50
①Compact layout
②Specification goods built-in exhaust valve, and can supply steam breaking lock equipment.
